Industry Insights + IndySoft News

IndySoft brings on a leader in the calibration industry, Rob Flack, as CEO.

IndySoft recently hired three new employees!

IndySoft becomes the first company in the calibration management software space to achieve external validation of their IT, security, and privacy practices.

IndySoft is proud to announce that it has achieved the ultimate certification, SOC 2 Type II compliance

IndySoft is committed to data privacy, security, and transparency.

Watch the recording of our webinar that highlights several of the new features now available with the version 12 release!

Watch the recording of our webinar that highlights several of the new features now available with the version 12 release!

Get up to speed with Version 12 by purchasing a 5-hour web training package.

IndySoft Version 12 is now Available! With over 200 new features and enhancements this is our BIGGEST RELEASE EVER! Read More to find out what is new!

Join us for our webinar on January 29th 8:30 PT / 11:30 ET to see a few of the exciting new features now available in IndySoft version 12!

Are you a master of measurements? Test your measurement terminology acumen - What is a slug?

The best-laid plans of mice and men often go awry. We have some good news and some not so bad news. Read on to see what is happening with our Version 12 release.

The NIST has revised it’s Standard Operating Procedure (SOP) for the Preparation of Calibration Certificates to comply with section 7.8, Reporting of Results, in the 2017 edition of ISO/IEC 17025.

Register now for our webinar on August 21 at 8:30 PT/11:30 ET that will give a sneak peak into Version 12, our biggest release in a year!

IndySoft recently hired two new junior developers for our Charleston office! Can you guess who speaks Russian, who plays the french horn or who has a minor in mathematics based on first impressions? Take our quiz to find out!

Our East Coast crew is heading to the West Coast for the NCSLI Conference August 27-29! Stop by booth 300 to have a visit and see a preview of IndySoft version 12, scheduled to come out on September 17!

Today is a special day: IndySoft’s 20th anniversary. When I started off on this journey in 1993 I had no idea what I was getting into

Do you think you know IndySoft logos? Take our quiz to see if you can determine the order that different IndySoft logos have been used over the past 20 years.

Did you ever wonder how we got the International System of Units in the first place? Why is it changing now? Read more to explore its history and learn what is changing.

Are you using Fluke MET/CAL for your calibrations, but want IndySoft for asset management, certification and other daily business? With our Fluke results importer you get the best of both worlds!

Are you a master of measurements? Test your measurement terminology acumen - What is a barleycorn?

We have a new weekly feature on social media, Tip Tuesday! Like/Follow/Subscribe to IndySoft on your favorite social media channel to see our weekly updates!

Watch the recording of our webinar about our MET/CAL Import update that allows seamless data transfer of calibration procedure data from Fluke MET/CAL/BASE/TEAM 8 and 9 to IndySoft clients.

What is better than a gathering of your peers in Metrology? One that happens in your own backyard! We are looking forward to next week's Metrology Solutions Expo hosted by MSI Viking Gage at the TD Convention Center in our hometown of Greenville, SC!

Register now for our webinar on April 26 at 8:30 PT / 11:30 ET that will go over our new automated data sync for calibrations and our Fluke MET/CAL Import update.

Our new customer portal puts tons of information at your fingertips and makes it super easy to see new features in action. A short video is now include with all release notes so you can see a quick illustration of the new feature or bug fix.

For this month's Customer Spotlight we spoke with Mike Linn, metrology services manager at CBRE.

Are you a master of measurements? Test your measurement terminology acumen - What is a cubit?

A Case Study on how London Underground Limited was able to reduce costs and increase in-house calibrations with the implementation of IndySoft.

Are you an IndySoft expert? If you aren't, is there somebody in your organization who is? Are you sure? IndySoft training is the most effective way to ensure that you are getting the most out of your software investment.

Are you in need of a refresh or do you have a new hire that could benefit from learning about some basic metrology principles and terminology?

Our new training center in Charleston, South Carolina is now open!

Are you a master of measurements? Test your measurement terminology acumen - What does a nibble measure?

With over 54 feature enhancements and 23 bug fixes 11.1 is our biggest update since our Version 11 release. Watch the recording of our webinar on a few of the 11.1 highlights and to see our new customer portal in action!

Register now for our webinar on Thursday, February 8 at 11:30 ET / 8:30 PT that goes over the 11.1 updates and introduces our new customer portal.

We are going to be an exhibitor at the Measurement Science Conference Training Symposium this March in Anaheim, California! We hope to see you at Booth 500!

We are happy to announce we have released our first set of feature updates for the year 2018!! With over 54 feature enhancements and 23 bug fixes 11.1 is our biggest update since our Version 11 release!

For our first Customer Spotlight we spoke with Walter Nowocin, calibration lab manager at Medtronic, the world's largest medical device manufacturer.

Are you a master of measurements? Test your measurement terminology acumen - What does a furman measure?

Laboratories wishing to demonstrate their technical competence can do so via conformity with the international standard ISO/IEC 17025 ‘General requirements for the competence of testing and calibration laboratories’.

Are you a master of measurements? Test your measurement terminology acumen - What does a zoll measure?

IndySoft's Read-Only Client is an optimal solution for users that only perform limited routines or only need access to data.

In order to get to know our new developer, Michael, we played a little game of two truths and a lie. See if you can guess which of his responses is the lie.

Do you have a department manager that you would like to be able to add new users, but don't want them to have full administrative control?

Register now for our webinar on Thursday, November 30 at 1:00 ET / 10:00 PT that introduces our new Read-Only Client.

IndySoft is committed to helping our customers with their overall quality programs.

Remember Clippy? How many versions of Microsoft Office have you purchased since you saw Clippy?

Are you a master of measurements? Test your measurement terminology acumen - What does a crab measure?

Our guys Charles Thompson, Mitchell Jones and Tim Shafer spent October 24 – 26, 2017 at the Donald E. Stephens Convention Center in Rosemont, IL at the Quality Show.

This is our first time at The Quality Show and we couldn't be more excited!

We've added a laundry list of enhancements and features and updated the interface to improve the user experience, check out this recording of our recent webinar to see what is new!

IndySoft AMPED is for those who make measurement their business. We have been at it for nearly twenty years, helping our customers manage their asset tracking, calibration, and overall quality programs through software.

We’ve been hard at work here at IndySoft to bring the improvements and new features that you have been clamoring for. We are super excited about the changes now available in version 11 and hope that you are as well. Here are the highlights...

With over 120 new features, performance enhancements, improved interface and a new cloud-based subscription model, IndySoft’s latest release is designed to meet the needs of businesses in the calibration, tooling and preventive maintenance.

IDC predicts that by 2018, at least half of IT spending will be Cloud-based, reaching 60–70% of all Software, Services, and Technology Spending by 2020. In the not too distant past cloud computing was relegated to email and other front office applications.

The Graphical User Interface has been updated to provide more efficient viewing of the screens you use most. Developer Ben Sykes goes over the new docking panel functionality, docked headers and footers, and multi-panel layouts and how to enable them...

We've added a laundry list of enhancements and features and updated the interface to improve the user experience. Join us on October 11 as we show off what is new and how it will make your life easier.